您的位置: 首頁>產品中心>深孔鏜床
內容介紹
/ introduce
機床用途：該機床是加工圓柱形深孔零件的專用機床，適用于圓柱形深孔工件的鏜削加工，鏜孔時采用授油器供油 ，通過切削區，把切屑由排向床頭的排屑斗 。機床采用PLC控制，授油器和進給拖板往復運動均采用伺服電機控制，傳動采用居兩導軌中部的齒條傳動，保證了運動中進給傳動的精度和剛性的要求。床體兩側安裝防護，并采用地上油箱結構，改善了機床環境。機床可配兩組合自動或手動漲縮高效刀具，大大提高了機床加工效率。
該機床是一種操作、控制方便、高效、環保的深孔鏜床。
The usage of the machine,the machine is special equipment for machining deep cylindrical hole of workpieces.It suitable for boring the cylindrical workpiece.When boring the hole,the oil is supply from the guide carriage,and take the chips from the cutting area to the equipment of chip conveying on the headstock.
The machine is controlled by PLC, the reciprocating movements of guide carriage and feeding carriage are controlled by the servo motor.The drive is made by the racks in the two to ensure long movement feeding transmission accuracy and rigidity requirements. The protection on the two sides of the bed body and the use of the ground oil tank structure improve machine tool environment. The machine can be equipped with two automatic or manual expansion efficient tool,it greatly improves the machining efficiency.
The machine is a kind of deep hole boring machine with easy to operate and control, high efficiency and environmental friendly.
主要技術規格及性能 Main Specifications and Features
項目 / 型號
T2225、T2225 /1
T2240、T2240/1
鏜孔直徑范圍
the range of boring diameter
Φ40～250mm
Φ100～400mm
中心高
the height of center
400mm
500mm
鏜孔最大深度范圍 the range of boring depth
1000-10000mm
1000～12000mm
卡盤直徑（選配）
the diameter of chucks
φ400mm
φ500mm
中心架夾持直徑范圍（選配)workpiece clamped dia. Range of steady rest
φ50～φ400mm
φ100～φ500mm
托架工作范圍
φ50～φ400mm
φ100～φ500mm
主軸轉速范圍、級數
range and kinds of spindle speed
40～500r/min 12級 12 kinds
40～500r/min 12級12 kinds
主電機
the power of main motor
N=30kW
N=30kW
進給速度范圍range of feeding speed
5～1500mm/min (無級 stepless)
5～1500mm/min (無級 stepless)
進給電機
feeding motor
N=4.5kW伺服電機 servo motor
N=4.5kW伺服電機
servo motor
授油器液壓馬達guide carriage motor
BM2-400-L
servo motor
BM2-400-L
servo motor
冷卻泵電機
cool pump motor power
5.5KW；
n=1440r/min
7.5KW；
n=1440r/min
冷卻系統額定壓力
rated pressure of cooling system
2.5MPa
2.5MPa
冷卻系統流量
the flow of cooling system
200、 400L/min；
400、800L/min，（0.5MPa）
（此內容由www.jinanxianhua.cn提供）
